Setup Utility
Power Menu
When Windows 98 or Windows 2000 is starting up, the individual timeout functions of the Setup Utility will not work.
Power Management Mode:
HDD Motor Timeout:
ECO Mode Timeout:
Power Switch:
Fn+F7/Fn+F10 Key:
CD Drive*
Parameters
(
Power Management Mode*
HDD Motor Timeout
ECO Mode Timeout
2
Power Switch*
Fn+F7/Fn+F10 Key
CD Drive Speed
Power Management Modes
1
Speed:
: Default)
2
3
Disable*
Enable (Battery)
Enable (Always)
Automatically set through setting of Power
Management Mode (2 min / Never)
Automatically set through setting of Power
Management Mode (2 min / Never)
Standby
4
Hibernation*
Off
Disable
Enable
High
Low
Windows NT
Power Management
Functions
Mode
automatically set
HDD Motor Timeout
ECO Mode Timeout
Power Conservation
(AC Adaptor Connected)
[Enable (Always)]
2 min
2 min
[Off]
[Enable]
[High]
Enable (Always)
(Setting at the time of purchase)
2 min
2 min
Enable
*
1
"CD Drive" is a description about
drives, such as DVD-ROM, CD-
ROM, and CD-R/RW drives.
*
2
Does not operate for Windows 98 or
Windows 2000. The actual opera-
tion is set in Windows. However,
[HDD Motor Timeout] operates for
Windows 98.
*
3
At the time of purchase, [Power
Management Mode] is set to [Dis-
able]. (Note: It differs from the de-
fault setting.)
4
*
On Windows 98 or Windows NT, this
is not displayed when a hibernation-
specific partition on the hard disk is
not available. Reinstall the OS to
create a partition by using the Prod-
uct Recovery CD-ROM.
On Windows 2000, this item is not
displayed.
Enable(Battery)
Disable
2 min
Never
2 min
Never
Disable
Disable
57