Boot Menu; Exit Menu - Panasonic Toughbook CF-28 Series Reference Manual

Setup Utility

Boot Menu

Floppy Drive*
Hard Disk
CD Drive*
The default order is as follows:
[Floppy Drive]
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
NOTE
Boot First Menu
The device for starting up the Operating System can also be selected during computer start-up.
After the computer is turned on, the device selection display will appear when ESC is
pressed while "Press <ESC> to enter Boot First Menu" is shown.
When the setting of the [Boot] menu is changed, the selection screen display will also change.
The [Boot First Menu] is displayed only when [Display Boot Menu] in Security Menu is set to
[Enable].

Exit Menu

Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
Refresh Battery
Parameters
Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
Refresh Battery
1
*
*
2
[Hard Disk] [CD Drive].
Exit the Setup Utility and save your changes
to CMOS.
Exit the Setup Utility without saving your
changes to CMOS.
Set the default settings. The password re-
mains.
This item may not be displayed when start-
ing up the Setup Utility with the User Pass-
word.
Load previous values from CMOS for all
Setup items.
Save your changes to CMOS.
Refreshing the battery
( page 33)
1 This item is shown even when the floppy disk drive is not in-
stalled or [Floppy Operation] is set to [Disable].
2
"CD Drive" is a description about drives, such as DVD-ROM,
CD-ROM, and CD-R/RW drives.
and ,and then press F6 .
and ,and then press F5 .
58