Sanyo SAP–K181AHA–S Technical & Service Manual page 59

HR.
(1) Operation mode
AUTO ..................................
COOL ..................................
HEAT ...................................
MILD DRY ...........................
(2) Fan speed
Automatic operation ..........
HIGH ....................................
MEDIUM .............................
LOW ....................................
OI-332-07EG
Remote Control Unit (Display)
HR.
Symbols
HR.
Displayed when setting temperature
Displayed when transmitting data
Displayed when main unit sensor is in use
Displayed when temperature is shown
Displayed when the temperature
setting is at the upper or lower
allowable limit
Displayed when setting timer
(3) Set temperature
16–30 °C
When set to 28 °C ........
(4) Timer
12-hour ON Timer ..............
12-hour OFF Timer .............
1-hour OFF Timer ...............
(5) NIGHT SETBACK................
(6) Confirmation of
transmission.......................
(7) Flap angle indication .........
(8) Sweep indication ...............
C
ON
1
HR.
OFF
1
1 HR.
HR.
7