Table of Contents
Advertisement
MBT-5003 L-Band Up/Down Converter System
Ethernet Management
System Account Access Information
•
Admin, Read/Write, and Read Only Names and Passwords:
The factory defaults for these names/passwords are:
Note the following:
o These Name fields can be any alphanumeric combination with a maximum
o These Password fields can be any alphanumeric combination with a maximum
•
SMTP Server: Specify the mail server IP address from where you want to send the
e-mail.
•
SMTP Domain Name / Destination: The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e-mail feature of the Support Page (Sect.
6.5.5.1.3) is to be used.
o For SMTP Domain Name, specify the domain of the e-mail server (usually
o For SMTP Domain Destination, specify the e-mail recipient name (usually
Once the desired configuration settings have been made in this section, click [Submit Access] to
save these changes. Otherwise, click [Reset] if it is desired to revert back to the previously
assigned System Account Access Information.
o Admin
o Read/Write
o Read Only
length of 10 characters.
length of 10 characters.
found to the right of the @ symbol in an e-mail address).
found to the left of the @ symbol in an e-mail address).
comtech/comtech
opcenter/1234
monitor/1234
6–12
Revision 1
MN-MBT5003
Advertisement
Table of Contents
