Paper Is Low In Tray 3. Load Paper; Paper Is Empty In Tray 3. Load Paper - Samsung MultiXpress M537x series Service Manual

4. Troubleshooting
► Error Code
H1-1351
H1-1352
► Error message

Paper is low in Tray 3. Load paper.

Paper is empty in tray 3. Load paper.

► Symptom
Paper in the tray3 is less than 10% of specification. / The photo sensor is defective.
► Troubleshooting method
1) Remove tray3. Load the paper in tray3.
2) If paper is loaded but error message has not disappeared, check the following.
a) Remove the tray 3 pick up unit.
b) Check if the paper empty sensor is contaminated. If so, clean it.
c) If the paper empty sensor is defective, replace it.
d) If the empty actuator is defective, replace it.
4-108 Copyright© 1995-2013 SAMSUNG. All rights reserved.