Paper Empty In Tray 2 / Paper Is Empty In Tray 2. Load Paper - Samsung ProXpress M337x Service Manual

4. Alignment and Troubleshooting
► Error Code
H1-1252
H1-1254
► Error message

Paper empty in tray 2 / Paper is empty in tray 2. Load paper

► Symptom
There is no paper in the tray2. / Actuator-Paper Empty or photo sensor is defective.
► Troubleshooting method
1) Load the paper in the tray2.
2) If the problem persists, turn the machine off and check the following.
3) If the Actuator-Paper Empty is defective, replace it.
4) If the Photo Sensor(0604-001325) is defective, replace it. Check if the connector is connected properly.
5) If the problem persists, replace the SCF main board.(JC92-02636A)
4-55 Copyright© 1995-2013 SAMSUNG. All rights reserved.