Original Paper Jam Inside The Scanner - Samsung MultiXpress M537x series Service Manual

Mono laser mfp
Hide thumbs Also See for MultiXpress M537x series:
Table of Contents

Advertisement

► Error Code
U3–3411
U3–3413
U3–3414
► Error message

Original paper jam inside the scanner

► Symptom
Original jam has occurred around the scan in roller and regi roller.
► Troubleshooting method
1) Check if the pick up motor operates normally.
2) Open the DSDF cover. Check if the paper jam is occurred.
3) Pull the green lever of the Guide Exit Lower. Remove the jammed paper.
4) Check if there are any obstacles or contamination on the paper path. Remove it.
5) If the problem persists, check the followings.
a) Remove the DSDF Unit and white sponge.
b) Open the Guide Exit Lower Assy.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-189

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multixpress m437x series

Table of Contents