Mx-Xxxx Type Error Code; Paper Jam In Tray 1 - Samsung MultiXpress M537x series Service Manual

4.6.5. Mx-xxxx type error code

► Error Code
M1–1113
► Error message

Paper jam in Tray 1.

► Symptom
Paper jam has occurred in tray1.
► Troubleshooting method
1) Remove the tray1. Remove the jammed paper. And install the tray.
2) If the problem persists, check the followings.
3) Check if the proper paper is loaded in the tray. If not, replace the paper.
4) Check if the pick up/reverse/forward roller are contaminated or worn out. Replace these rollers.
5) Check that the registration sensor actuator moves freely and is not damaged. If necessary, install a new registration
sensor actuator assembly.
6) Check the connection between the registration sensor and on the main board. If necessary, install a new registration
sensor.
7) Check that the feed sensor actuator moves freely and is not damaged. If necessary, install a new feed sensor
actuator assembly.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-147