Potterton Paramount three 30 Installation Manual page 110

Programming
Function extension module
1/2
(6020/6021)
Sensor input BX21/BX22
(6040 - 6043)
Function input H2 EM1/2
(6046, 6054)
Contact type H2 EM 1/2
(6047, 6055)
Voltage values 1/2 H2 mod-
ule 1-2
(6049, 6051, 6057, 6059)
Function values 1/2 H2 mod-
ule 1-2
(6050, 6052, 6058, 6060)
110
Fig. 27: Example for two different sensor curves
flow
Determination of the functions, which will be controlled via the extension mod-
ules 1 and 2.
- Multifunctional: For possible functions which can be assigned to the multifunc-
tional inputs/outputs, see prog. no. 6030 to 6055.
- Heating circuit 1 For this usage, the respective settings can be adjusted in the
menu point Heating circuit 1.
- Heating circuit 2 For this usage, the respective settings can be adjusted in the
menu point Heating circuit 2.
- Heating circuit 3 For this usage, the respective settings can be adjusted in the
menu point Heating circuit 3.
- Solar DHW: For this usage, the respective settings can be adjusted in the menu
point Solar.
- Primary contr/system pump : For this usage, the respective settings can be adjus-
ted in the menu point Primary contr/system pump.
Sensor inputs for the modules 1 and 2.
Functions in addition to the basic functions will be possible by configuring the
sensor inputs BX21 and BX22.
Explanations see prog.-no. 5930).
Explanations see prog.-no. 5950.
Explanations see prog.-no. 5951.
The linear sensor curve is defined over two fixed points. The setting is made with
two parameter pairs for Function value and Voltage value (F1 / U1 and F2 / U2).
Paramount three 30-115 kW
y
7308272-03 03.14