Roller Assy.-Registration - Oki MC873dn Maintenance Manual

Oki Data CONFIDENTIAL

4.2.23 Roller Assy.-registration

(1) Detach the front cover Assy. (Refer to section 4.2.17)
(2) Remove the three screws (silver) ① and pull out the gear Assy. hopping ② .
(3) After detaching the cover gear MPT ③ , remove the two screws (silver) ④ and
detach the gear Assy. MPT ⑤ .
(4) Remove a screw (silver) ⑥ , detach the cover Conn ⑦ , and disconnect the cable
⑧ from the clamp.
(5) Remove the four screws (silver) ⑨ and detach the roller Assy. registration ⑩ .
45850101TH Rev.1
⑨
⑩
⑨
⑧
⑨
⑤
③
④
4. REPLACEMENT OF PARTS
⑥
⑦
②
①
Do not remove the screw mark No. 1;
remove screws No. 2, No. 3 and No. 4.
4-45