Oki MC873dn Maintenance Manual page 46

Oki Data CONFIDENTIAL
No. Category PJL Status Panel messages
Code
32 Error 40997 (Y) %COLOR% Please
350 40998 (M) install new Image
351 40999 (C) Drum Unit.
352 40996 (K) Image Drum Life.
353
Press the [Details]
button for help.
33 Error 40937 (Y) %COLOR% Please
560 40938 (M) install new Image
561 40939 (C) Drum Unit.
562 40936 (K) Image Drum Life.
563
Press the [Details]
button for help.
34 Error 40476 (Y) %COLOR% Please
564 40477 (M) install new Image
565 40478 (C) Drum Unit.
566 40475 (K) Image Drum Life.
567
Press the [Details]
button for help.
35 Error 40482 (Y) %COLOR% Install
680 40483 (M) New Image Drum.
681 40484 (C) Image Drum Life.
682 40481 (K)
683 Press the [Details]
button for help.
36 Error 40971 Fuser Unit Life.
354 Install New Fuser
Unit.
Press the [Details]
button for help.
37 Error 40970 Belt Unit Life.
355 Install New Belt
Unit.
Press the [Details]
button for help.
38 Error 40926 The Fuser Unit
348 is not installed
correctly.
Reset Fuser Unit.
Press the [Details]
button for help.
45850101TH Rev.1
Description
The life of the image drum (Alarm)
Error 350 : Y
Error 351 : M
Error 352 : C
Error 353 : K
Warning status takes effect at Cover Open/Close.
The toner empty error is occurred after the image
drum reached its life.
Error 560 : Y
Error 561 : M
Error 562 : C
Error 563 : K
This is displayed until a user exchanges the
image drum.
Notifies the life of the drum.
The operator can prolong the life temporarily by
pressing the OK button.
Error 564 : Y
Error 565 : M
Error 566 : C
Error 567 : K
Notifies the life of the drum absolutely.
This status is appeared after the end of the
prolonged period (see also Error 564~567).
Error 680 : Y
Error 681 : M
Error 682 : C
Error 683 : K
Notifies the fuser has reached its life. This is the
error displayed based on the counter to indicate
that the fuser has reached its life, and printing will
stop.
Warning status takes effect at Cover Open/Close.
This error will occur on some user setting mode.
Notifies the transfer belt has reached its life.
This is the error displayed based on the counter
to indicate that the belt has reached its life, and
printing will stop.
Warning status takes effect at Cover Open/Close.
The engine detects the fuser unit error.
It recovers, when a value is able to be normally
read by re-reading after cover closing. When not
recovering, exchange of a fuser unit is needed.
No. Category PJL Status Panel messages
Code
39 Error 40964 Waste Toner Full.
356 Install New Belt
Unit.
Press the [Details]
button for help.
40 Error 40915 (Y) %COLOR% Toner
544 40916 (M) cartridge not
545 40917 (C) properly installed.
546 40914 (K)
547 Press the [Details]
button for help.
41 Error 40034 (Y) Image Drum not
340 40035 (M) properly installed.
341 40036 (C) %COLOR% Check
342 40033 (K) Image Drum.
343
Press the [Details]
button for help.
42 Error 40992 The Fuser Unit
320 is not installed
correctly.
Reset Fuser Unit.
Press the [Details]
button for help.
43 Error 40037 Belt Unit not
330 installed correctly.
Re-set the Belt
Unit.
Press the [Details]
button for help.
44 Error 40021 %COVER% Open.
310 40991
311 40720 Press the [Details]
587 button for help.
45 Error 40967
46 Error 40967
2. TROUBLESHOOTING PROCEDURES
Description
Indicates waste toner full. Warning status takes
effect only once at Cover Open/Close, and the
error occurs again when about 500 copies have
been printed.
Shows that the toner is not supplied (the toner
cannot be detected).
The lever of toner cartridge may not be locked, or
toner cartridge may be set with protection tape.
Shows that the toner cartridge lever has not been
locked.
Error 544 : Y
Error 545 : M
Error 546 : C
Error 547 : K
The image drum is not correctly installed.
Error 340 : Y
Error 341 : M
Error 342 : C
Error 343 : K
The fuser unit is not correctly installed.
The belt unit is not correctly installed.
The cover is open.
Error 310 : Top Cover
Error 311 : Front Cover
Error 587 : Rear Cover
Indicates that receiving the NIC download data.
Indicates that finished receiving the NIC
download data.
2-21