Oki MC873dn Maintenance Manual page 173

Oki Data CONFIDENTIAL
4.2.10.9 Frame Assy.-Hopping(ADF)
(1) Open the Cover-Assy-Top-ADF.
(2) Open the Cover-Lock and slide to left side the Frame Assy.-Hopping(ADF) ① and
remove it.
Cover-Assy-Top-ADF
Cover-
Lock
45850101TH Rev.1
①
Lever
Guide
Hole
Cover-Assy-
Top-ADF
Lever
①
Notes on assembling:
When assembling the Frame Assy.-Hopping(ADF) ① , refer the following steps.
Rotate the lever of the Frame Assy.-Hopping(ADF) ① to the back side.
1.
2. Rotate up and keep the lever of the Cover-Assy-Top-ADF.
And through the left and right tip of the lever of Frame Assy.-
Hopping(ADF) ① to the each of guides of Cover-Assy-Top-ADF.
Additionally, insert the the left end of the lower side shift of the Frame
Assy.-Hopping(ADF) ① to hole of the Cover-Assy-Top-ADF.
Next, push the shaft of Frame Assy.-Hopping(ADF) ① to right side with
rotating the Gear of the right end of the Cover-Assy-Top-ADF until fit the
D-cut face of the shaft to the D-depression of the Gear.
3. Close the Cover-Lock.
Gear
shaft
①
4. REPLACEMENT OF PARTS
Cover-Lock
4-23