Oki MC873dn Maintenance Manual page 29

Oki Data CONFIDENTIAL
No. Category PJL Status Panel messages
Code
6 Initializing - Inspection is
required.
PU Flash Error
7 Initializing - Inspection is
required.
PU Communication
Error
8 Initializing - Status Mode
9 Initializing -
45850101TH Rev.1
Description
It is shown that PU firmware has booted in Loader
mode.
If initialization is completed, it will change to the
status of no.7.
This status may occur also in a user environment.
When it occurs, the maintenance by a
maintenance member is required (equivalent to
S/C).
Communication error occurred between CU and
PU. PU firmware may not be downloaded.
Displays that communication to PU firmware
failed.
This status may occur also in a user environment.
When it occurs, the maintenance by a
maintenance member is required (equivalent to
S/C).
If this status occurred during the unit initialinzing
the message is displayed by English.
Displays that normal Online mode starts.
Data (Job) from an external portion is processed
even though an error takes place after Online
(ready) state once this mode starts.
Displays Error or Warning on a panel.
This function is secret to users. Therefore, this
status does not occur in a user environment.
Indicates that it is initializing of scanner.
This message isdisplayed that mirror position
initialization at the time of power-on scanner is
starting.
No. Category PJL Status Panel messages
Code
10 Initializing - %STORAGE%
Error:
%ERRCODE%
To %STORAGE%
format, select
[Format]
To shut down,
select [Cancel]
11 Information - %TRADEMARK%
12 Information -
13 Information - Document glass
cover is open.
Please Close it.
14 Information - Finished changing
language.
15 Initializing - Detected a
abnormality of
inside database.
The data must be
deleted.
After press Close,
the data will be
deleted, and then
reboot.
16 Information - #N/A!
2. TROUBLESHOOTING PROCEDURES
Description
%ERRCODE%: 0
Indicates that the unformated Storage is detected
during the initializing.
%ERRCODE%: 250
Indicates that machine detected broken file about
secure print.
Needs to format once again.
[Format] pressed, Storage format is started and
the unit is rebooted automalically.
[Cancel] pressed, the unit is shut down.
---------------------------------
The following is changed by a status parameter.
%STORAGE%：
HDD
%ERRCODE%：
Error Code
Indicates that the new consumable (toner).
This status should be appeared at detecting the
new consumable (toner), and be disappeared
automatically after 3 seconds.
%TRADEMARK% is contained in the consumable
tag.
Indicating that printer/MFP received the
command for identifying printer from AirPrint
device such as iPhone,
This status is removed automatically in 10
seconds.
Document glass cover is open.
if document glass cover is open, scanning cannot
be started.
-
Indicating that it is in the state which the database
cannot recover.
[OK] pressed, the error database is to be deleted
and the unit is rebooted automalically.
[Cancel] pressed, the unit is shut down.
Indicating that the IC card reader supported with
a this machine is connected.
2-4