Telephone operation
Basic phone operation
continued from previous page
Handset
To make a call:
•
1. Lift the handset.
2. Dial a number.
• To override automatic line selection, press the
LINE button for the line you wish to select, then
lift the handset.
To answer a call, lift the handset.
•
To hang up, place the handset on the base.
•
Speakerphone
To make a call:
•
1. Press and release the desired LINE button or
[
SPEAKER]. The
2. Wait for a dial tone, then dial the number.
To answer a call, press [
•
the LINE button of the incoming call.
To end the call, press [
•
NOTES:
If HEADSET is programmed as the default mode
•
(see AUTOMATIC MODE on page 39 of the instal-
lation guide), you must press [
activate the speakerphone.
If SPEAKERPHONE is selected in the AUTOMATIC
•
MODE menu, pressing any line key will select the
line and activate the speakerphone. If HEADSET
is selected in the AUTOMATIC MODE menu (page
39 of the installation guide) and a headset is con-
nected, pressing any LINE key will select the line
and activate the headset.
10
SPEAKER light goes on.
SPEAKER] or press
SPEAKER].
SPEAKER] to
continued on
next page