Advertisement
Available languages
Available languages
8.
Secure the Main Harness to the Vehicle Harness
using 1 Tie Wrap.
• Ensure routing of main harness does not interfere
with climate control mechanism. The main harness
must be secured to the vehicle harness with no slack
in this area.
9.
Remove the Tape securing the Vehicle's 8P and 2P
Pre-Connectors.
10. Disconnect the Wire Jumper connector from the
Vehicle's 2P Pre-Connector.
• Discard the Wire Jumper connector. (This is used for
the power window interrupt circuit.)
11. Connect the Main Harness's 8P Connector to the
Vehicle's 8P Pre-Connector.
12. Connect the Main Harness's 2P Connector to the
Vehicle's 2P Pre-Connector.
- 9 -
Advertisement
