Advertisement
Available languages
Available languages
Check C-3
Check the following conditions below.
(The Smart Engine Start only has 20min. of total run time. Open and close one of the doors to reset the SES clock.)
1. The brake pedal isn't pressed.
2. The shift lever is placed in "P".
3. All doors are closed (incl. tailgate).
4. The IG/ACC are OFF.
5. SES registration was successful.
If all the above conditions applies, try to Smart Engine Start again.
Does Smart Engine Start work properly?
Troubleshooting completed
Yes
Go to check F.
Is the problem solved?
Yes
Contact Subaru for additional troubleshooting information.
- 31 -
No
No
Advertisement
