Subaru H001SVA800 Installation Manual page 21

7. Once Registration is complete, look for the hazard light
to flash once and horn sound once simultaneously.
• If not, ID registration has failed. Please see Check A
in Troubleshooting. ("Check A" on page 26)
8. Close the Hood.
9. Look for the hazard lights to flash once and horn
sound once simultaneously.
• If not, please see Check B in Troubleshooting.
("Check B" on page 27)
10. Disconnect the 1P SES Diagnostic Connectors.
11. Switch the "ENGINE START STOP" Button to OFF.
- 21 -