Advertisement
Available languages
Available languages
Check B
Yes
Are connectors I and H on the wiring diagram (page 36) connected? Is the connector plugged in properly?
Yes
Check the continuity on the Hood Switch Installation (page 14-15). Is there any connection?
Yes
Check the signal for HOOD using the wiring harness checks (page 37). Was the problem solved?
No
No
Check the car by using the SSM. Are there any problems found?
No
Replace the hood SW and register again.
Is the hood SW installed?
The Hood Switch and Hood Switch Bracket may have problem.
Replace the Hood Switch and Hood Switch Bracket.
Try to register again. Was it solved?
- 27 -
No
Install the hood SW.
No
Connect them.
No
Yes
Troubleshooting completed.
Yes
Troubleshooting completed.
Yes
Fix the car problem first.
Advertisement
