Advertisement
Available languages
Available languages
Check D
Check if any one of the following conditions applies, while remote engine start was running.
1. The "ENGINE START STOP" button was pressed.
2. The brake pedal was pressed.
3. Any door was opened. (incl. tailgate)
4. The hood was opened.
5. The Smart Engine Start Run-time has expired or has passed the 20 min total Run-time.
6. The shift lever was placed in other than "P".
7. The engine speed exceeded 3000rpm (Was the Accelerator pressed?)
8. The Lock button on the remote was pressed more than 2 seconds.
Yes
Smart Engine Start works properly.
(Engine automatically stops if any one is applied)
Check if fuse is blown?
(See vehicle's repair manual for the location of fuse.)
No
See vehicle's repair manual, replace a fuse.
Go to check F.
Is the problem solved?
Yes
Contact Subaru for additional troubleshooting information.
- 32 -
No
Yes
No
Advertisement
