Table of Contents
Advertisement
305.book Page 27 Tuesday, April 15, 2003 11:15 AM
Installation Guidelines for Installing the System Yourself
If you choose not to hire a professional to install your satellite dish and receiver,
there are some basic procedures that you should follow. You should also refer to
any information that was provided with your purchase about the dish, mounting
hardware, and specific adjustments to make for your geographic location.
Equipment You May Need
We recommend using the following tools:
• Drill and various drill bits
• Wrenches
• Screwdrivers
• Compass
• Plumb line and bubble level
• Signal level meter
• You will also need the information supplied with your system.
• The telephone number for the company that provides your programming
subscription
• The channel map download channel
• The authorization channel
• Instructions on how to properly adjust your satellite dish for your geographic
location:
- How to adjust the "hands-of-the-clock" position of the LNBF
- How to adjust the elevation setting for your satellite dish
- How to adjust the compass direction setting for your satellite dish
DSR305 User Guide
4
Installation
27
Advertisement
Table of Contents
