Table of Contents
Advertisement
305.book Page 38 Tuesday, April 15, 2003 11:15 AM
4
• Using standard RCA-type audio/video cables, connect the two speaker icon (R
and L) ports on the rear panel of the receiver to the audio input ports on the
VCR.
• Using standard RCA-type audio/video cables, connect the audio and video
inputs on the TV (or TV monitor using baseband audio/video inputs) to the
outputs on the VCR.
After you complete the installation procedures, you may wish to use the on-screen
menus to make adjustments to the satellite receiver's operation.
38
Advertisement
Table of Contents
