Controlling The Image Finishing Tone; Custom Image - Pentax K-1 Operating Manual

Controlling the Image Finishing
Tone

Custom Image

1
Press D in standby mode.
3
The Custom Image setting screen appears.
2
Select an image finishing
tone.
Auto Select
Bright
Natural
Portrait
Landscape
Vibrant
Radiant
Available operations when shooting with the
viewfinder
Main switch to U
H
Proceed to Step 6 if you do not need to change the
parameters.
66
Bright Bright
±0 ±0 ±0 ±0 ±0 +1 +1 +1 +1 ±0
Parameter Adj. Parameter Adj.
Cancel Cancel Check Check
Muted
Flat
Bleach Bypass
Reversal Film
Monochrome
Cross Processing
Uses Digital Preview to preview
the background image with the
selected setting applied.
Saves the preview image (only
when the image can be saved).
3
Press G.
The parameter setting screen appears.
4
Set the parameters.
Available operations
Selects a parameter.
AB
Adjusts the value.
CD
Switches between [Contrast], [Highlight
Q
Adjustment], and [Shadow Adjustment].
OK OK
Switches between [Sharpness], [Fine
R
Sharpness], and [Extra Sharpness].
(Not available in C mode.)
Resets the adjustment value to the default
M
setting.
5
Press E.
The screen of Step 2 reappears.
The adjustment values for parameters are displayed.
6
Press E.
The camera returns to standby mode.
u Caution
• In R mode, the image finishing tone is fixed to [Auto
Select].
• The Digital Preview operation in Step 2 is disabled when the
drive mode is set to [Multi-exposure] or [Interval Shooting].
Saturation Saturation
Cancel Cancel Reset Reset OK OK