Correcting Images; Brightness Adjustment - Pentax K-1 Operating Manual

4
Set the parameters.
Available operations
3
Selects a parameter.
AB
Adjusts the value.
CD
5
Press E.
The screen of Step 2 reappears.
6
Press E.
7
Press F.
The camera returns to standby mode.
u Caution
• This function cannot be used in combination with some other
functions. (p.107)
• The Digital Preview operation in Step 2 is disabled when the
drive mode is set to [Multi-exposure] or [Interval Shooting].
• Depending on the filter used, it may take longer to save
images.
t Memo
• Still images can also be processed with digital filters in
playback mode. (p.83)
68
Extracted Color 1 Extracted Color 1

Brightness Adjustment

Cancel Cancel Check Check OK OK
Highlight Correction
Shadow Correction
Expands the dynamic range and enables a wider range of tones
to be recorded by the CMOS sensor and reduces the
occurrence of overexposed/underexposed areas.
Set the correction functions from [D-Range Settings] of the A2
or C2 menu.
u Caution
• When the sensitivity is set to less than ISO 200, [Highlight
Correction] cannot be set to [ON].
t Memo
• [Highlight Correction] in C mode can be set to [AUTO] or
[OFF].
HDR Capture
Takes three consecutive images at three different exposure
levels to create a single composite image with them.
1
2
3

Correcting Images

Select [HDR Capture] in A3 menu and press D.
The [HDR Capture] screen appears.
Select the capture type and
press E.
Set the range in which to change the exposure in
[Bracket Value].
Select from [±1EV], [±2EV], or [±3EV].
A2/C2
A3
99999 99999 99999 99999
HDR Capture HDR Capture
Bracket Value Bracket Value
Auto Align Auto Align
Cancel Cancel OK OK