Recording The Camera Route (Gps Logging) - Pentax K-1 Operating Manual

Recording the Camera Route (GPS
Logging)
1
Select [GPS/E-Compass] in D2 menu and press
D.
The [GPS/E-Compass] screen appears.
2
Select [GPS Logging] and press D.
3
The [GPS Logging] screen appears.
The GPS automatically turns on.
3
Set the logging conditions.
Logging Interval
Logging Duration
Memory Card
Options
4
Select [GPS Logging] and press D.
The confirmation screen appears.
5
Select [Start] and press E.
GPS logging starts.
The screen of Step 3 reappears.
u Caution
• GPS log data cannot be recorded when the camera is
connected by USB to a computer.
74
GPS Logging GPS Logging
GPS Logging GPS Logging
Logging Interval Logging Interval
Logging Duration Logging Duration
Memory Card Options Memory Card Options
Select from [5sec.], [10sec.],
[15sec.], [30sec.], or [1min.].
Select from [1hr.] to [24hr.].
(When [Logging Interval] is set to
[5sec.], select from [1hr.] to [9hr.].
When [Logging Interval] is set to
[10sec.], select from [1hr.] to [18hr.].)
Select the SD1 card or the SD2 card.
t Memo
• During GPS logging, "LOG" is displayed under the GPS
D2
positioning status icon on the status screen and Live View
screen. When the time set in [Logging Duration] elapses,
"LOG END" is displayed and a GPS log file is saved.
• Select [Exit] in Step 5 to stop GPS logging. A GPS log file is
saved.
• When the GPS is turned off by pressing 4, GPS logging
stops temporarily. (The countdown for [Logging Duration]
continues.) GPS logging starts again when the GPS is turned
on.
• If there is GPS log data to be saved as a log file, "LOG END"
is displayed in [GPS Logging] on the screen of Step 3. Select
[Save] in Step 5 to save the GPS log data as a log file. "LOG
END" is displayed also when the power is turned off due to
15sec. 15sec.
1 1 hr. hr.
low battery level or when the battery is replaced. In this case,
save the GPS log file before restarting GPS logging.
• During GPS logging, you cannot change the settings of
[Logging Interval] and [Logging Duration].
• A log file (KML format) is saved in the "GPSLOG" folder on
the memory card with a file name of a sequential number from
001 to 999 and month and day (example: 001_0505).
However, if there is no GPS log data to be saved, neither a
log file nor a folder is created. In addition, if the log file
"999_" has been saved, a new log file cannot be saved.
• You can display the camera route on Google Earth, etc. by
transferring a log file to a computer and importing it.