Using The Gps - Pentax K-1 Operating Manual

u Caution
• You cannot use this function when the ASTROTRACER
function is used.
t Memo
• The adjusted composition is saved even if Live View is ended
or the camera is turned off. To reset the saved adjustment
value when Live View is ended, set [Composition Adjust.] to
Y (Off) in [Memory] of the A5 menu. (p.103)
3
72

Using the GPS

The following functions are available with the camera's built-in
GPS unit.
Saves the GPS positioning data received
GPS Logging
periodically to the memory card. (p.74)
Tracks and captures celestial bodies.
(p.75)
By matching the movement of the built-in
ASTROTRACER Shake Reduction unit with the movement
of celestial bodies, celestial bodies can be
captured as individual points even when
shooting with a long exposure setting.
Adjusts the camera's date and time
GPS Time Sync settings using information obtained from
GPS satellites.
Press 4 to turn the GPS on. The
GPS indicator lamp lights up. Press
4 again to turn the GPS off.
You can check the GPS positioning status on the status screen
and Live View screen. The icon color tells the ongoing action.
Green 3D positioning
Yellow 2D positioning
Red No positioning
When a picture is taken while the GPS is on, the GPS
information is stored internally in the image file. The GPS
information is not stored in the movie file. You can check the
GPS information in Detailed Information Display in playback
mode. (p.15)
GPS positioning status
2 5 0 250 5.6 5.6
1/ 1/ F F
1 6 0 0 1600
99999 99999
99999 99999