Controlling The Image Finishing Touch; Adjusting The White Balance With Color Temperature; Custom Image - Pentax K-3 Operating Manual

Adjusting the White Balance with Color
Temperature
Specify the white balance with the color temperature.
1
Select p in Step 2 on p.52, and press B.
2
Select from p1 to p3.
3
3
Press G.
4
Adjust the color
temperature.
Set the color temperature value
within the range from 2500K to
10000K.
Available operations
Q 100 Kelvin units
R 1000 Kelvin units
ABCD Fine-tunes the color temperature.
5
Press E.
The White Balance setting screen reappears.
t Memo
• Select [Mired] in [13. Color Temperature Steps] of the E2
menu to set the color temperature in mired units. The color
temperature can be changed in 20 mired units with Q, and
100 mired units with R. However, figures are converted to
and displayed in Kelvin.
54
When you want to take pictures with a slightly different style,
you can set the desired picture style before shooting.
Try out the various settings, and find your best picture style.
1
2
±0 ±0 ±0 ±0
Check Check
Cancel Cancel OK OK
±0 ±0
Controlling the Image Finishing
Touch

Custom Image

Press D in standby mode.
The Custom Image setting screen appears.
Select an image finishing
touch.
Bright (default setting)
Natural
Portrait
Landscape
Vibrant
Radiant
Available operations when shooting with the
viewfinder
Main switch to U Uses Digital Preview to preview
the background image with the
selected setting applied.
H Saves the preview image (only
when the data is available).
Proceed to Step 6 if you do not need to change the
parameters.
Z
Bright Bright
Parameter Adj. Parameter Adj.
Cancel Cancel Check Check OK OK
Muted
Bleach Bypass
Reversal Film
Monochrome
Cross Processing