Pentax K-1 Operating Manual page 47

1
Set the mode dial to the desired exposure mode.
Q or R appears on the
status screen for the value that
can be changed.
The value that can be changed is
underlined in the viewfinder.
The values of the current camera
settings are displayed on the LCD
panel.
During Live View, D appears for
the value that can be changed.
2
Turn R.
The aperture value is changed in
J, K, L, M, or N mode.
The sensitivity is changed in H
mode.
3
Turn Q.
The shutter speed is changed in
I, K, or L mode.
t Memo
• The settings for the exposure can be specified in increments
4.5 4.5
3 0 30
1/ 1/ F F
100 1 0 0
• In L or N mode, the difference from the correct exposure is
• For each exposure mode, you can set the camera operation
99999 99999
99999 99999
u Caution
• The correct exposure may not be obtained with the selected
• In M mode, the drive mode cannot be set to [Continuous
Noise Reduction when Shooting with a
Slow Shutter Speed
When shooting with a slow shutter speed, you can reduce
30 30 F4.5 F4.5 100 100 9999 9999
1/ 1/
image noise in [Slow Shutter Speed NR] of [Noise Reduction] in
the A2 menu.
AUTO
ON
OFF
of 1/3 EV steps. In [1 EV Steps] of the E1 menu, you can
change the adjustment steps to 1/2 EV steps.
displayed on the EV bar scale while the exposure is adjusted.
for when Q or R is turned or M is pressed. Set in
[E-Dial Programming] of [Button Customization] in the A5
menu. (p.99)
shutter speed and aperture value when the sensitivity is fixed
at a certain sensitivity.
Shooting], [Bracketing], or [Interval Shooting].
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of the
camera.
Applies Noise Reduction when the shutter speed is
slower than 1 second.
Does not apply Noise Reduction at any shutter
speed.
3
A2
45