Table of Contents
Advertisement
Menu
Item
15 WB Adjustable Range
16 AWB in Tungsten Light
17 WB When Using Flash
E3
18 Color Temperature Steps
19 Enable/Disable Control
20 Change AF Point Button
21 Auto SR Off
22 Save Rotation Info
23 Save Menu Location
24 Catch-in Focus
E4
25 AF Fine Adjustment
26 Using Aperture Ring
Reset Custom Functions
Function
Sets whether to automatically fine-tune the white balance when
the light source is specified for the white balance setting.
Sets the tungsten light color tone when the white balance is set to
[Auto White Balance].
Sets the white balance setting when using a flash.
Sets the adjustment steps for the Color Temperature option of the
white balance.
Enables or disables operation of the selected group of buttons and
dials.
Selects the c operation when the focusing area selection mode
is set to one of some select-type options.
Automatically turns off the Shake Reduction function when the
drive mode is set to [Self-timer] or [Remote Control].
Saves rotation information when shooting.
Saves the last menu tab displayed on the monitor and displays it
again the next time F is pressed.
Enables Catch-in Focus shooting when a manual focus lens is attached.
The shutter is released automatically when the subject comes into focus.
Allows you to precisely fine-tune your lenses with the camera's
autofocus system.
Enables the shutter to release when the lens aperture ring is set
to a position other than 9 (Auto).
Resets all the settings of the Custom Setting menus to the defaults.
Default Setting
Page
Fixed
p.63
Strong
p.63
Correction
Auto White
p.63
Balance
Kelvin
p.64
Type1
p.41
Type1
p.53
Enable Auto
p.56
SR Off
On
p.79
Reset Menu
p.21
Location
Off
p.110
Off
p.54
Disable
p.109
–
–
31
1
Advertisement
Table of Contents
