Table of Contents
Advertisement
3.
Click OK when finished.
To configure Phone Home using the CLI, see the ibrix_phonehome command in the HP StoreAll
OS CLI Reference Guide.
Compiling the MIB
IMPORTANT:
Insight Manager to view events.
1.
Download ibrixMib.txt from /usr/local/ibrix/doc/.
2.
Rename the file to ibrixMib.mib.
3.
In HP Systems Insight Manager, complete the following steps:
a.
Unregister the existing MIB by entering the following command:
<BASE>\mibs>mxmib -d ibrixMib.mib
b.
Copy the ibrixMib.mib file to the <BASE>\mibs directory, and then enter the following
commands:
<BASE>\mibs>mcompile ibrixMib.mib
<BASE>\mibs>mxmib -a ibrixMib.cfg
For more information about the MIB, see the "Compiling and customizing MIBs" chapter in the HP
Systems Insight Manager User Guide, which is available at:
http://www.hp.com/go/insightmanagement/sim/
Click Support & Documents and then click Manuals. Navigate to the user guide.
22
Getting started
You must compile and manually register the StoreAll MIB file if you use HP Systems
Advertisement
Table of Contents
Troubleshooting
