Obtaining Custom Logging From Ibrix_Collect Add-On Scripts - HP StoreAll 8800 Administrator's Manual

3. Under General Settings, do the following:
a. If you want data collection to occur automatically when a system crash occurs, select
Enable automatic data collection. The automatic collection includes additional crash
digester output. The file name format of the archive file generated from an automatic
collection is: <timestamp>_crash_<crashedNodeName>.tgz.
b. Enter the number of previously collected data sets (archive files) to be retained in each
node of the cluster.
4. Under Email Settings, you can choose to have a zip file containing specific system and HP
StoreAll command outputs about the cluster configuration sent via email. To enable this setting,
select Enable sending cluster configuration by email.
5. If you select Enable sending cluster configuration by email, enter the email details (SMTP
server, the email address from which the email will be sent and the email address to which
the email will be sent.
NOTE:
addresses with a semicolon.
6. Click OK.
To set up email settings to send cluster configurations using the CLI, use the following command:
ibrix_collect -C -m <Yes\No> [-s <SMTP_server>] [-f <From>] [-t <To>]
NOTE: More than one email ID can be specified for -t option, separated by a semicolon.
The "From" and "To" command for this SMTP server are Ibrix Collect specific.

Obtaining custom logging from ibrix_collect add-on scripts

You can create add-on scripts that capture custom StoreAll and operating system commands and
logs. To activate an add-on script, place it in the specified location, and the add-on script will run
when the ibrix_collect command is executed. Output of these add-on scripts is packaged
into IbrixCollect tar files.
Note: You can specify more than one email address for the To field by separating
Collecting information for HP Support with the IbrixCollect 121