/opt/hp/platform/bin/hpsp_credmgmt --update-cred
--cred-selector=couplet:couplet/array/500c0ff194705000/mgmtport_b/rw --cred-type=upwpair
--cred-username=<Custom username> --cred-password=<Custom password>
/opt/hp/platform/bin/hpsp_credmgmt --update-cred
--cred-selector=couplet:couplet/array/500c0ff194705000/mgmtport_a/ro --cred-type=upwpair
--cred-username=<Custom username> --cred-password=<Custom password>
/opt/hp/platform/bin/hpsp_credmgmt --update-cred
--cred-selector=couplet:couplet/array/500c0ff194705000/mgmtport_a/rw --cred-type=upwpair
--cred-username=<Custom username> --cred-password=<Custom password>
5.
Exit the command prompt and log into the node again. When the installation wizard appears,
continue with the standard restore process.
Performing the recovery
IMPORTANT:
Manager in the cluster before you perform the restore.
Complete these steps:
1.
Log into the node.
2.
On the Welcome dialog box, click Begin.
3.
On the Individual Server Setup dialog box, enter your node specific information and click
OK.
If you are restoring a node into a cluster, ensure that there is an active Fusion
Performing the recovery 135