Setting Up A Usb Driver In Windows 98 Second Edition - Motorola SBV5220 User Manual

Introduction

Setting Up a USB Driver in Windows 98 Second Edition

1
Insert the SBV5220 VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the Motorola VoIP cable modem to the PC.
2
Connect the Motorola VoIP cable modem to your computer with a USB cable. For further instructions, see
"Cabling and Startup for a Single User"
the Add New Hardware Wizard window is displayed:
3
Click Next. The following window is displayed:
SBV5220 VoIP Cable Modem User Guide
Installation Troubleshooting
on page 10. A few seconds after you complete the USB connection,
Glossary License
13