Polaris 2003 Pro X Service Manual page 50

ENGINE
Engine Assembly - Continued
5. Lay crankshaft into the lower case half. Make
sure that the crankshaft rotates smoothly and
does not bind. Rotate the bearings so that the
anti-rotation pins rest in their appropriate
galleries.
NOTE: Lubricate the crankseal prior to installation.
6. Apply 3-Bond sealer to top half of
crankcase. Lubricate oil pump drive gear.
3-Bond 1215
PN 2871557
7. Install the upper case half.
8. Turn the crankcase over and torque the case
bolts in sequence illustrated in beginning of
chapter.
Crankcase Bolt Torque
16.6 - 18 ft.lbs. (22 - 25 Nm)
2.18
120 Gram Tube