Adjusting Belt Deflection - Polaris 2003 Pro X Service Manual

CLUTCHING

Adjusting Belt Deflection

Belt deflection can be adjusted without removing the clutch
from the jackshaft.
1. Pull belt into driven clutch to slightly open sheaves.
2. Loosen three bolts on adjustment cam.
3. Turn cam counterclockwise to reduce distance
between sheaves. Do not rotate past #1 position.
4. Torque bolts to specification.
Production washer is usually .075 thick with other .020 or .030 washers
as required. May use optional, thinner (.048 ) washer PN 7555899 if re-
quired to obtain proper sheave width. Either the .075 or .048 washer
must be installed in this location to provide support for the adjustment
pins.
4.42
Used to adjust
belt tension. One must
always be installed.
Optional Thin Adjustment Washer (P-85)
.048 - PN 7555899