Torsion Bars Kits; Adjustable Torsion Bar Assembly; Pro X Radius Rods - Polaris 2003 Pro X Service Manual

STEERING / FRONT SUSPENSION
Torsion Bars Kits - 440 Pro X Fan, 440/600/700/800 Pro X, (42.5 max. width)
Description
1/2
5/8
9/16

Adjustable Torsion Bar Assembly

This assembly comes complete with all the necessary hardware to install. Slide in the aluminum block and then
attach the torsion bar assembly. Let the glide block center it self at normal ride height, then mark the glide housing
and drill through top and bottom. Insert bolt and torque to the correct amount.

Pro X Radius Rods

440/600/700/800 Pro X, radius rods have both inner and outer rod ends for adjustability.When radius rods are
installed, remove shocks and move the front suspension through its range of motion to make sure there is no
binding in the rod ends.
6.6
Part Number
STD
2900183
2900184
Adjustable Torsion Bar Assembly - PN 2872395
12.691
Upper Radius Rod
Lower Radius Rod