Single Slot Usb Cradle - Motorola WT4090 User Manual

Wearable terminal
Hide thumbs Also See for WT4090:
Table of Contents

Advertisement

4 - 8
WT4090 Wearable Terminal User Guide

Single Slot USB Cradle

Troubleshooting the Single Slot USB Cradle
Table 4-4
Symptom
Charge Status
LEDs do not light
when wearable
terminal or spare
battery is
inserted.
Wearable
terminal battery
is not charging.
Spare battery is
not charging.
Possible Cause
Cradle is not receiving
Ensure the power cable is connected securely to both the cradle
power.
and to AC power.
Wearable terminal is
Remove and re-insert the wearable terminal into the cradle,
not seated firmly in the
ensuring it is firmly seated.
cradle.
Spare battery is not
Remove and re-insert the spare battery into the charging slot,
seated firmly in the
ensuring it is firmly seated.
cradle.
Wearable terminal was
Ensure cradle is receiving power. Ensure wearable terminal is
removed from cradle or
seated correctly. Confirm main battery is charging. If a wearable
cradle was unplugged
terminal battery is fully depleted, it can take up to four hours to
from AC power too
fully recharge a battery (if the wearable terminal is off, and longer
soon.
if the wearable terminal is operating).
View battery status by selecting
Power
Battery is faulty.
Verify that other batteries charge properly. If so, replace the faulty
battery.
The wearable terminal
Remove and re-insert the wearable terminal into the cradle,
is not fully seated in
ensuring it is firmly seated.
the cradle.
Ambient temperature
Move the cradle to an area where the ambient temperature is
of the cradle is too
between 0°C and 40°C (32°F and 104°F).
warm or too cold.
Battery inserted
Verify that the battery is oriented properly and firmly seated in the
incorrectly.
battery well correctly with the contacts facing down. See
3-3 on page 3-6
Battery is faulty.
Verify that other batteries charge properly. If so, replace the faulty
battery.
Ambient temperature
Move the cradle to an area where the ambient temperature is
of the cradle is too
between 0 °C and 40 °C (32 °F and 104 °F).
warm or too cold.
Solution
Start
icon.
for proper battery orientation.
>
>
>
Settings
Control Panel
Figure

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wt4070

Table of Contents