Rs409 Scanner - Motorola WT4090 User Manual

RS409 Scanner

To connect the RS409 scanner to the wearable terminal:
NOTE There are two RS409 configurations available. The short cable configuration connects the RS409 to the
wearable terminal
mounted on the hip.
Remove the rubber plug from the wearable terminal interface connector.
1.
Connect the RS409 interface cable to the wearable terminal interface connector. If the wearable terminal is
2.
mounted on the arm, connect the cable to the interface connector closest to the wrist.
Scanner Cable Connector
Connecting RS409 to Wearable Terminal
Figure 3-4
If using the extended cable configuration, route the scanner cable up to the shoulder and down to the hand that
3.
the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip.
Cable Clip Installation
Figure 3-5
Rotate the trigger assembly to the correct position for the hand that the scanner mounts to.
4.
mounted on the arm. The extended cable configuration connects the RS409 to the WT4090
Interface Connector
Accessories 3 - 7