Motorola WT4090 User Manual page 64

4 - 4 WT4090 Wearable Terminal User Guide
Troubleshooting the Wearable Terminal (Continued)
Table 4-1
Problem
Wearable terminal
turns itself off.
A message appears
stating that the
wearable terminal
memory is full.
Cause
Wearable terminal The wearable terminal turns off after a period of inactivity. If the
is inactive. wearable terminal is running on battery power, this period can
be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the wearable
terminal is running on external power, this period can be set to
1, 2, 3, 5, 10, 15 and 30 minutes.
Check the power settings by selecting
Control Panel
Change the setting if you need a longer delay before the
automatic shutoff feature activates.
Battery is depleted. Replace the battery.
Battery is not Insert the battery properly (see
inserted properly. Main Battery on page
The wearable Recharge the battery.
terminal's battery is
low and it powers
down to protect
memory content.
Too many files Delete unused memos and records. You can save these
stored on the records on the host computer.
wearable terminal.
Too many If you have installed additional applications on the wearable
applications terminal, remove them to recover memory.
installed on the Select
wearable terminal. icon.
Select the unused program and select Remove.
Solution
> icon >
Power Power Off
Installing and Removing the
1-5).
> >
Start Settings Control Panel
> >
Start Settings
tab.
>
Remove Programs