Waking The Wearable Terminal - Motorola WT4090 User Manual

Waking the Wearable Terminal

The wake up conditions define what actions wake up the wearable terminal after it has gone into suspend mode.
The wearable terminal can go into suspend mode by either pressing the Power button or automatically by control
panel time-out settings. These settings are configurable and the factory default settings are shown in
Wakeup Default Settings
Table 2-9
Condition for Wakeup
AC power is applied.
Wearable terminal is inserted into a cradle.
Wearable terminal is removed from a cradle.
Wearable terminal is connected to a serial device.
Wearable terminal is connected to a USB device.
Wearable terminal is disconnected from a USB
device.
A key is pressed.
An attached scanner is triggered.
Wireless LAN activity is detected.
A headset is connected to the wearable terminal.
NOTE If the battery is removed and replaced, the only way to wake up the terminal is by pressing the Power button.
Using the Wearable Terminal 2 - 17
Power Button
No
No
No
No
No
No
No
No
No
No
Table 2-9.
Automatic Time-out
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes