Four Slot Ethernet Cradle - Motorola WT4090 User Manual

4 - 6 WT4090 Wearable Terminal User Guide

Four Slot Ethernet Cradle

Troubleshooting the Four Slot Ethernet Cradle
Table 4-2
Problem
Wearable terminal amber
Charge Status LED does not
light when wearable terminal
inserted.
Wearable terminal battery is
not charging.
During data communication,
no data was transmitted, or
transmitted data was
incomplete.
Wearable terminal's main
batteries not charging.
Cause
Cradle is not receiving power.
Wearable terminal is not
correctly seated.
Wearable terminal was
removed from cradle or cradle
was unplugged from AC power
too soon.
Battery is faulty.
The wearable terminal is not
fully seated in the cradle.
Wearable terminal removed
from cradle during
communication.
Incorrect cable configuration.
Ethernet connection error. Link
LED is not lit (see Link LED on
page 3-5).
Ambient temperature of the
cradle is too warm or too cold.
Solution
Ensure the power cable is connected
securely to both the cradle and to AC power.
Remove and re-insert the wearable terminal
into the cradle, ensuring it is correctly seated.
Ensure cradle is receiving power. Ensure the
wearable terminal is seated correctly. If the
wearable terminal battery is fully depleted, it
can take up to four hours to fully recharge a
Standard Battery and it can take up to six
hours to fully recharge an Extended Life
Battery.
Verify that other batteries charge properly. If
so, replace the faulty battery.
Remove and re-insert the wearable terminal
into the cradle, ensuring it is correctly seated.
Replace wearable terminal in cradle and
retransmit.
See the system administrator or refer to the
WT4090 Integrator Guide.
See the system administrator. Probable
Ethernet connection error.
Move the cradle to an area where the
ambient temperature is between 0 °C and 40
°C (32 °F and 104 °F).