Self-Diagnostic Mode; Self-Diagnostic Error Code Table - Panasonic SA-MAX500LMK Service Manual

8.4.

Self-Diagnostic Mode

Mode Name
Self Diagnostic To enter into self diagnostic checking
Mode
System will perform a check on any
Error code
unusual/error code from the memory
information
Delete error
To clear the stored in memory
code
(EEPROM IC)
Cold Start To active cold start upon next AC
power up when reset start is
execute the next time.
8.5.

Self-Diagnostic Error Code Table

Self-Diagnostic Function (Refer Section 8.4. Self-Diagnostic Mode) provides information on any problems occurring for the unit and
its respective components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held
unless it is cleared.
The error code is automatically display after entering into self-diagnostic mode.
8.5.1. Power Supply Error Code Table
Item
Description
FL Display
Example:
Key Operation
Front Key
Step 1: Select CD mode
(Ensure no disc is inserted).
Step 2: Press & hold [ ] button
follow by [ ] on
/
main unit for 2 seconds.
Step 1: In self diagnostic mode,
Press [ ] on main unit.
To exit, press [^/I] on main
unit or remote control.
Step 1: In self diagnostic mode,
Press [0] on remote control.
To exit, press [^/I] on main
unit or remote control.
In self diagnostic mode:
1. Press [3] button on
the remote control.