Table of Contents
Advertisement
7 Self Diagnostic and Doctor Mode Setting
This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability.
7.1.
Self Diagnostic Mode
Here is the procedures to enter into Self Diagnostic Mode.
Step 1 : Turn on the unit, and then press and hold [ ] button for 2 seconds follow by [
Step 2 : The display show as follow.
To exit the Self Diagnostic Mode
Use either one of the following methods to cancel the Self Diagnostic Mode.
• Press the power button on the main unit.
• Unplug the AC cord.
7.1.1.
Self Diagnostic Table
Mode name
Self Diagnostic Mode
To enter into self diagnostic
checking
Error code information
System will perform a check on
any unusual/error code from the
memory
Delete Error code
To clear the stored in memory
(EEPROM IC)
Item
Description
FL display
Example:
15
] on the unit.
Key operation
1. Select CD mode
(Ensure no CD inserted).
2. Press and hold [
] for
2 seconds follow by [
main unit.
1. In self diagnostic mode,
Press [STOP] on main unit.
To exit, press [TA] on main uint
or remote control.
1. In self diagnostic mode,
Press [0] on remote control.
To exit, press [TA] on main uint
or remote control.
] on
Advertisement
Table of Contents
