Table of Contents
Advertisement
13 Self-Diagnosis Function
This unit is equipped with the self-diagnosis function, which displays an error when it occurs, for use during servicing.
13.1. Entering into Self-Diagnostic Mode
13.2. Automatic Displayed Error Codes
13.2.1. Automatic Display Function
For a power unit error, the code is automatically displayed.
F61:
13.2.2. Re-Display
· For F61 Display
− − − − When the code, F61 is displayed, the power is automatically turned off.
− − − − The code, F61 is displayed for three seconds, and then the current time appears.
− − − − To retrieve the code, turn on the power button so that the code F61 appears, however, is switched to time display after three
seconds, and the power is automatically turned off.
· For F76 Display
− − − − The abnormalities is an output or the abnormalities in a power supply of POWER AMP IC.
13.2.3. Description of Error Code
13.2.3.1. F61
· State, Condition
When the power is turned on, the unit is automatically turned off. The power does not turn on.
· Cause, Troubleshooting
Power circuit system failure and/or direct current flown to speaker terminal
Identify the cause and replace with new parts.
13.3. Memorized Error Codes
13.3.1. Activating Self-Diagnosis Function and Displaying Method
1. Turn on the power.
2. Select DVD/CD function. With no DVD/CD inserted in the player, press
and press the "0" button on the remote control for at least two seconds in order to display "DVD_F---".
3. Press the
button. If a memorized error is detected, the result of self diagnosis is displayed. (Ex.: T H15)
All manuals and user guides at all-guides.com
Automatically displayed on the LCD of the player.
19
and hold down the button for at least two seconds,
SA-VK725DEE
Advertisement
Table of Contents
