Table of Contents
Advertisement
6.2.
Self-Diagnostic Mode Table
By pressing various button combinations on the main unit and remote control unit, you can activate the various modes for checking.
Special Note:
• Due to the limitations of the no. characters that can be shown on the FL Display, the "FL Display" button on the remote control
unit can be used to show the two display pages. (Display 1 / Display 2).
• Refer to Section 5 for the section on "Control Key Buttons Operations".
6.2.1.
Self-Diagnostic Mode Table 1
Self-Diagnostic Mode shall be started if an abnormal state occurs.
20
Advertisement
Table of Contents
