FireplaceXtrordinair 36DV-AR Owner's Manual page 39

3 Follow the directions below to remove the natural gas orifice. Apply thread sealant to the LP orifice
(#49 - it has "49" stamped on it) and tighten in place with a 1/2" open end wrench. Replace the
spring. Slide the adjustable shutter back in place.
a
Push the adjustable shutter to the
left, off the orifice (be careful not
to bend the shutter linkage).
Adjustable
Shutter
Shutter
Linkage
d
Use a 1/2Ó open
end wrench to
unscrew the
orifice.
O
PTIONAL
b
Slide the adjustable shutter
down, away from the orifice.
Orifice
e
E (C
QUIPMENT
c
Remove the spring
f
Burner Orifice Sizing for
36DV and Heritage Bay
)
ONTINUED
P
AGE
Apply thread
sealant to the
new orifice
prior to
installation.
NG LP
#31 #49
39