Facing Detail - FireplaceXtrordinair 36DV-AR Owner's Manual

Facing Detail

+ To achieve a facing that is flush with the drywall to the side of the fireplace, recess the framing
directly next to the fireplace. See the illustration below.
TOP
VIEW
Fireplace
1"
Faceplate
I
NSTALLATION
NOTE: The overlap is 1-1/2" along
the top of the face.
Face
Access Door
Do not tuck tile underneath the face on the bottom (there
will be a 1/2" air space below the access door). You may
do this on the sides and top, but not on the bottom.
Make sure these shaded areas are faced over
when using the arched face. Rectangular faces
do not require this area to be faced.
1"
This 2x4 is recessed 3/8"
to make a flush facing
1/2" Drywall
1/2" Concrete Board
3/8" Tile
(C .)
ONT
- For Qualified Installers Only!
1-3/8Ó Rectangular Faces
1/4" Arch Faces
2-1/4" Enamel Faces
Glass
1/2"
Air Space
6-3/4"
21-1/2"
26-3/4"
35-1/4"
Fireplace
1"
3/8" Tile
Faceplate
1"
1"
3-3/4"
23"
1"
1/2" Concrete Board
1/2" Drywall
The tile overlaps the drywall
for an overlap facing
P 11
AGE