Robot Start-Up Without The Perimeter Wire - Stiga Autoclip 720S User Manual

STARTING THE ROBOT WITHOUT THE PERIMETER WIRE
This mode can be executed with the remote control to mow areas completely surrounded by
fences or small areas whose boundaries cannot be marked or for practical demonstrations on
the functioning of the robot.
When using the robot without the perimeter wire, make sure the robot does not
run into obstacles, corners or dangerous objects.
1. Press the ON key (A) .
2. Enter the password (if prompted) (See
"Password Entry").
3. Press "Enter" to enter into programming
mode. Scroll through the items until
reaching "WORK MODE" Set the option
"NO BORDER" Press either the "+" or "-"
key to set the working minutes of the robot.
4. Press "Enter" to confi rm the selection.
5. Press "Start/Pause" (B) several times to
exit from the menu and to restart the robot.
6. Manoeuvre the robot using the remote
control.
7. At the end of mowing, press the "OFF/
STOP" key (C) to safely stop the robot (see
"Robot Safety Stop").
It is recommended to move the robot with the remote control when mowing inside
a narrow, well-visible area and to make sure there are no people or domestic
animals next to the operating zones of the robot.
"ON" KEY (A) "START/PAUSE" KEY (B)
"OFF/STOP" KEY (C)
43
EN
User's manual