General Installation Overview - Panasonic DP-C262 Operating Instructions Manual

General Installation Overview

Follow the guidelines in this booklet when setting up the machine and installing each software. Please read all
procedures completely before attempting to setup this machine.
1
Turning the Power Switches ON.
1
Turn ON ( ) the Main Power Switch, and
then turn ON ( ) the Power Switch.
Main Power Switch : Rear of the machine.
Power Switch
Power Switch
●
When connecting the USB Cable, do not
turn the Power Switch of the machine to
the ON ( ) position until instructed to do
so on the PC screen.
2
Connect all Cables and the Power Cord to
the machine.
●
USB Cable is used for Local Printer
connection.
Telephone Cable is used for connecting
the optional Fax Communication Board
(Order Number: DA-FG320) to the
telephone line.
2
: Left side of the machine.
Main Power Switch
USB
Cable
LAN
Cable
Telephone
Line Cable
External
Telephone Cable
2
Setting up the Network Configuration.
Setup the Network Configuration using the
Control Panel of the machine. (See pages 4-6)
●
Network Configuration should be setup by
the System Administrator.
3
Installing the Printer/Fax Driver.
■ Printer Driver
The printer driver installation may differ depending on
the system environment of your office. Please consult
with your System Administrator before installation.
●
Each printer driver (For Windows Network
Connection and USB Connection) can be used
without problems when each driver is
individually installed.
Windows Network Connection:
There are 2 typical ways to install a printer driver.
(A) Peer to Peer Connection
(Direct Connection)
Installing the Printer Driver on your PC.
(See pages 8-10)
(B) Network Print Server Connection
1 Setup your Network Print Server.
Installing the Printer Driver on the
Network Print Server and configure the
Shared permissions. (See pages 11-20)
2 Setting up your client PC.
Connect your client PC to the Shared
Printer on your Network Print Server.
(See page 21)
Local (USB) Connection:
Installing the Printer Driver on your PC.
(See pages 22-27)
●
This machine is USB 2.0 compliant, and backward
compatible with the standard USB revision 1.1.
●
When connecting the USB Cable, do not turn the
Power Switch of the machine to the ON ( )
position until instructed to do so on the PC screen.
●
When connecting to the USB 2.0 port of your
PC, use a USB 2.0 High Speed Cable for better
performance.
■ Fax Driver
Installing the Fax Driver on your PC.
(See pages 28-31)