General Installation Overview
Follow the guidelines in this booklet when setting up the machine and installing each software. Please read all
procedures completely before attempting to setup this machine.
1
Turning the Power Switches ON.
1
Connect all Cables, and the Power Cord
to the machine.
● ● ● ● ●
USB Cable is used for USB Port
connection.
Telephone Cable is used for connecting
the optional Fax Communication Board
(Order Number: DA-FG320 or DA-FN350)
to the telephone line.
2
Turn ON ( ) the Main Power Switch first,
and then turn ON ( ) the Power Switch.
Main Power Switch : Rear of the machine.
Power Switch
Power Switch
● ● ● ● ●
When connecting the USB Cable, do not
turn the Power Switch of the machine to
the ON ( ) position until instructed to do
so on the PC screen.
2
USB
Cable
LAN
Cable
Telephone
Line Cable
External
Telephone Cable
: Left side of the machine.
Main Power Switch
2
Setting up the Network Configuration.
Setup the Network Configuration using the
Control Panel of the machine. (See pages 4-7)
● ● ● ● ●
Network Configuration should be setup by
the System Administrator.
3
Installation
■ ■ ■ ■ ■ Installing the Printer Driver and
Application Software
Applications selected from the Software
Selection screen will be automatically
installed. (See pages 8-13)
■ ■ ■ ■ ■ Printer for USB Port Connection
Installing the Printer Driver onto the USB
Port. (See pages 14-21)
● ● ● ● ●
This machine is USB 2.0 compliant, and backward
compatible with the standard USB revision 1.1.
● ● ● ● ●
When connecting the USB Cable, do not turn the
Power Switch of the machine to the ON (
position until instructed to do so on the PC screen.
● ● ● ● ●
When connecting to the USB 2.0 port of your
PC, use a USB 2.0 High Speed Cable for better
performance.
■ ■ ■ ■ ■ Fax Driver
Installing the Fax Driver on your PC.
(See pages 22-24)
Optional Fax Communication Board is
required. (Order Number: DA-FG320 or DA-
FN350)
4
Setting up
■ ■ ■ ■ ■ Configure the Shared Setting for
the Network Print Server
Windows NT Server
Windows 2000 Server
Windows Server 2003
(See pages 25-30)
■ ■ ■ ■ ■ Setting up your Client PC
Connecting the Shared Printer on the
Network Print Server. (See page 31)
■ ■ ■ ■ ■ Setting up the Completion Notice
A Job Completion Notice will be displayed
on the PC screen when the Copy/Print
Job is completed. (See page 32)
)