Network Configuration
1 1
Enter the Gateway Address, and
then select "OK".
Ex: 192.168.1.111
●
When entering a 1 or 2-digit number segment,
add "00" or "0" in front of the number to scroll
to the next segment of numbers, or press the
"
" key on the Control Panel to enter a
period after the number.
●
To correct a mistake, press
move the cursor to the right side of the
incorrect address.
To delete, press "Clear", and re-enter the
correct address.
6
1
2
or
to
12
Press the Reset key.
13
Turn the Power Switch OFF, and
then back ON again.
●
The Power Switch is on the left side of the
machine.